Lexus NX 300 Owner's Manual page 96

Vehicle Settings
■
 PBD (Power Back Door)
(P.114)
Select to set up the following items.
• System settings
Select to enable/disable the power back
door system.
• Volume
Select to set the volume of the buzzer
which sounds when the power back door
system.
• Kick Sensor
Select to enable/disable the kick sensor.
*1
: Vehicles with power back door
*2
: Vehicles with Hands Free Power Back
Door
 Stop & Start (if equipped)
(P.270)
• Stop & Start system operation time
Select to set the length of time the Stop &
Start system will operate when the "A/C"
switch of the air conditioning system is on.
 TPMS (Tire Pressure Warning Sys-
tem) (P.394)
Select to initialize the tire pressure warning
system.
 Oil maintenance (if equipped)
(P.383)
Select to reset the engine oil maintenance
information (message indicating mainte-
nance is required and distance until the
next oil change) after engine oil mainte-
nance is performed.
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
*1
*2
2-1. Instrument cluster
Meter settings
■
 Language
Select to change the language on the dis-
play.
 Units
Select to change the unit of measure for
fuel consumption.
Eco Driving Indicator Light

(P.85)
Select to activate/deactivate the Eco Driv-
ing Indicator Light.
 Switch settings (P.90)
Displays a procedure to register a desired
.
screen to
You can register 1 screen as a shortcut,
which can be displayed by pressing
.
 Drive information screen (P.91)
Select to choose between 2 items that will
be displayed on each drive information
Drive Info 1", "Drive Info 2" and
screen ("
"Drive Info 3
") respectively.
 Pop-up display (P.88)
Select to set the following pop-up displays,
which may appear in some situations,
on/off.
• Intersection guidance display of the nav-
igation system-linked system
• Incoming call display of the hands-free
phone system
• Stop & Start system duration
• Stop & Start system status
• Instrument panel brightness adjustment
display
95
2
*
*