Table of Contents
Advertisement
Fixture
F2X
R3
R2
R2X
R1
L1
L2
B2
B3
When securing some types of child
restraint systems in rear seat, it may not
be possible to properly use the seat
belts in positions next to the child
restraint without interfering with it or
affecting seat belt effectiveness. Be
sure your seat belt fits snugly across
your shoulder and low on your hips. If it
does not, or if it interferes with the child
restraint, move to a different position.
Failure to do so may result in death or
serious injury.
When installing a child restraint in
the rear seats, adjust the front seat
so that it does not interfere with the
child or child restraint system.
When installing a child seat with
support base, if the child seat inter-
feres with the seatback when latch-
ing it into the support base, adjust
the seatback rearward until there is
Child restraint system installation method
Confirm with the operation manual enclosed with the child restraint system about
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
Reduced-height forward-facing child restraint systems
Full-size, rearward-facing child restraint systems
Reduced-size, rearward-facing child restraint systems
Reduced-size, rearward-facing child restraint systems
Rearward-facing infant seat
Left lateral-facing (carrycot) infant seat
Right lateral-facing (carrycot) infant seat
Junior seat
Junior seat
If the seat belt shoulder anchor is
When installing a junior seat, if the
1-2. Child safety
Description
no interference.
ahead of the child seat belt guide,
move the seat cushion forward.
child in your child restraint system is
in a very upright position, adjust the
seatback angle to the most comfort-
able position. And if the seat belt
shoulder anchor is ahead of the
child seat belt guide, move the seat
cushion forward.
67
1
Advertisement
Table of Contents
