Lexus NX 300 Owner's Manual page 123

122
3-2. Opening, closing and locking the doors
Jam protection function
■
Sensors are installed in the right and left
sides of the power back door. When the
door is automatically closing and the sen-
sors are pushed due to an object being
clamped, etc., the jam protection function
operates.
From that position the door automatically
moves a little in the opposite direction and
then the function stops.
If the back door opener is inoperative
■
The back door can be unlocked from the
inside.
1
Remove the cover.
To protect the cover, place a rag between
the flathead screwdriver and the cover as
shown in the illustration.
2
Move the lever.
Customization
■
Settings (e.g. back door automatic open
and stop position) can be changed. (Cus-
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
tomizable features: P.482)
WARNING
Back door closer
■
● In the event that the back door is left
slightly open, the back door closer will
automatically close it to the fully closed
position. It takes several seconds
before the back door closer begins to
operate. Be careful not to catch fingers
caught or anything else in the back
door, as this may cause bone fractures
or other serious injuries.
● Use caution when using the back door
closer as it still operates when the
power back door system is canceled.
Power back door
■
Observe the following precautions when
operating the power back door.
Failure to do so may cause death or seri-
ous injury.
Check the safety of the surrounding
●
area to make sure there are no obsta-
cles or anything that could cause any
of your belongings to get caught.
● If anyone is in the vicinity, make sure
they are safe and let them know that
the back door is about to open or
close.
● If the power back door system is
turned off with the main switch while
the back door is operating automati-
cally, the automatic operation is
stopped. The back door then has to be
operated manually. Take extra care
when on an incline, as the back door
may open or close unexpectedly.