If The Electronic Key Does Not Operate Properly - Lexus NX 300 Owner's Manual

Hide thumbs Also See for NX 300:
Table of Contents

Advertisement

458
7-2. Steps to take in an emergency
Locking the door
1
Move the inside lock button to the
lock position.
2
Close the door while pulling the
door handle.
WARNING
When using the mechanical key and
operating the power windows or
moon roof (if equipped)
Operate the power window or moon
roof after checking to make sure that
there is no possibility of any passenger
having any of their body parts caught in
the window or moon roof.
Also, do not allow children to operate the
mechanical key. It is possible for children
and other passengers to get caught in
the power window or moon roof.
Starting the engine
1
Ensure that the shift lever is in P and
depress the brake pedal.
2
Touch the Lexus emblem side of the
electronic key to the engine switch.
When the electronic key is detected, a
buzzer sounds and the engine switch will
turn to IGNITION ON mode.
When the smart entry & start system is
deactivated in customization setting, the
engine switch will turn to ACCESSORY
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
mode.
3
Firmly depress the brake pedal and
check that message is shown on the
multi-information display.
4
Press the engine switch.
In the event that the engine still cannot
be operated, contact your Lexus
dealer.
Stopping the engine
Shift the shift lever to P, set the parking
brake and press the engine switch as you
normally do when stopping the engine.
Electronic key battery
As the above procedure is a temporary
measure, it is recommended that the elec-
tronic key battery be replaced immediately
when the battery is depleted. (P.406)
Alarm (For Malaysia, South Africa and
Egypt)
Using the mechanical key to lock the doors
will not set the alarm system.
If a door is unlocked using the mechanical

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx 200

Table of Contents