Table of Contents
Advertisement
ous mode.
■
Pollen removal mode
Pollen is removed from the air and the air
flows to the upper part of the body.
Select
When the pollen removal mode is on,
is displayed on the air conditioning
control screen.
In order to prevent the windshield from fog-
ging up when the outside air is cold, the
dehumidification function may operate.
The pollens are filtered out even if the pol-
len removal mode is turned off.
WARNING
To prevent burns (vehicles with wind-
■
shield wiper de-icer)
Do not touch the glass at lower part of
the windshield or to the side of the front
pillars when the windshield wiper de-icer
is on.
Using automatic mode
1
Press the "AUTO" button.
2
Adjust the temperature setting.
3
To stop the operation, press the
"OFF" button.
On some models: When in automatic
mode, the air outlet modes and fan
speed levels are not displayed in the air
conditioning control panel display.
If the fan speed setting or air flow
modes are operated, the automatic
mode indicator goes off. However,
automatic mode for functions other
than that operated is maintained.
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
5-2. Using the air conditioning system and defogger
on the option control screen.
Using automatic mode
■
Fan speed is adjusted automatically accord-
ing to the temperature setting and the
ambient conditions.
Therefore, the fan may stop for a while until
warm or cool air is ready to flow immedi-
ately after the "AUTO" button is pressed or
"AUTO" is selected.
■
Air conditioning filter
P.405
■
Customization
Settings (e.g. A/C automatic mode switch
operation) can be changed.
(Customizable features: P.482)
Adjusting the temperature for
driver and passenger seats sepa-
rately ("DUAL" mode)
To turn on the "DUAL" mode, perform
any of the following procedures:
Press the "DUAL" button.
Select "DUAL" on the option con-
trol screen.
Adjust the temperature setting of
the passenger side with the passen-
ger side temperature adjustment
button.
The indicator comes on when the
"DUAL" mode is on.
Air outlet layout and operations
Location of air outlets
■
The air outlets and air volume changes
according to the selected air flow
mode.
333
5
Advertisement
Table of Contents
