Table of Contents
Advertisement
100
2-1. Instrument cluster
Zone of Eco driving
C
Eco Driving Indicator will not operate
under the following conditions:
The shift lever is in any position
other than D.
A paddle shift switch is operated.
Neither Normal mode nor Eco
mode is selected. (P.304)
The vehicle speed is approximately
130 km/h (80 mph) or higher.
Settings of the display and non-display
of the Eco Driving Indicator Light can
be changed. (P.95)
Route guidance display (vehicles
with navigation system)
When the vehicle approaches an inter-
section, the direction the vehicle
should go is guided by the arrow.
When the vehicle approaches an inter-
section, the route guidance will start
and the distance
will also be displayed.
*
: The distance indication will disappear
when the vehicle passes through the
intersection.
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
*
to the intersection
Display customization
Select to display/non-display the fol-
lowing items:
• Route guidance to destination
• Driving assist system information
• Audio system operation status
• Lane display
When customizing vehicle features,
ensure that the vehicle is parked in a
safe place with the shift lever in P and
the parking brake set.
1
Press and hold the "DISP" button
until the screen changes.
Customization can be performed when
the head-up display is on.
2
Press the "DISP" button to switch
between on and off.
On and off will be switched between each
time the button is pressed.
If the button is left alone without being
operated for a short time, setting will be
finished automatically.
■
When the battery is disconnected
The customize settings of the head-up dis-
play will be reset.
Advertisement
Table of Contents
