AHS (Adaptive High-beam
*
System)
*
: If equipped
The Adaptive High-beam System
uses a camera sensor located
behind the upper portion of the
windshield to assess the brightness
of the lights of vehicles ahead,
streetlights, etc., and automatically
controls the headlight light distribu-
tion as necessary.
WARNING
■
Limitations of the Adaptive High-
beam System
Do not overly rely on the Adaptive High-
beam System. Always drive safely, taking
care to observe your surroundings and
turning the high beams on or off manu-
ally if necessary.
■
To prevent incorrect operation of the
Adaptive High-beam System
Do not overload the vehicle.
System functions
Adjusts the brightness and illumi-
nated area of the high beams
according to the vehicle speed.
Adjusts the intensity of the high
beams, while driving on a curve, so
that the area in the direction that the
vehicle is turning will be illuminated
more brightly than other areas.
Operates the shaded high beams so
that the area around vehicles ahead
is partially not illuminated while all
other areas continue to be illumi-
4-3. Operating the lights and wipers
nated with the high beams.
The shaded high beams help optimize for-
ward visibility while reducing the dazzling
effect on the drivers of vehicles ahead.
Adjusts the distance that the low
beams are projected according to
the distance to a preceding vehicle.
When driving at low speeds, the
cornering lights will illuminate the
area around both front corners of
the vehicle.
Activating the Adaptive High-
beam System
1
Press the Adaptive High-beam Sys-
tem switch.
2
Push the lever away from you with
the headlight switch in the
position.
195
4
or