Table of Contents
Advertisement
120
3-2. Opening, closing and locking the doors
to ON.
●
When the back door is unlocked.
However, even if the back door is locked the
power back door will operate, providing
that the following situations:
• When the electronic key is being carried
and the power back door switch is
pushed
• When set up by customizable functions
to be able to operate, even when locked,
when using the wireless remote control
(P.482)
When the engine switch is in IGNITION
●
ON mode, in addition to the above for
the opening operations, the back door
operates for any of the following condi-
tions:
• Parking brake is engaged
• The brake pedal is depressed
• The shift lever is in P
For Malaysia
With the power back door operations set
●
to ON.
●
When the back door is unlocked
●
When the engine switch is in IGNITION
ON mode during opening operations,
the back door unlocks and operates for
any of the following conditions:
• Parking brake is engaged
• The brake pedal is depressed
• The shift lever is in P
Kick sensor operating conditions
■
(Hands Free Power Back Door)
●
When the kick sensor setting is turned
on.
The electronic key is within the opera-
●
tional range. (P.128)
■
Back door closer
In the event that the back door is left slightly
open, the back door closer will automati-
cally close it to the fully closed position.
Whatever the state of the engine switch, the
back door closer operates.
Operation of the power back door
■
●
A buzzer sounds and the emergency
flashers flash twice to indicate that the
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
back door is opening/closing.
●
When the power back door operations
are OFF, the power back door does not
operate but it can be opened and closed
by hand.
When the power back door automati-
●
cally opens, if an abnormality due to peo-
ple or objects is detected, operation will
stop.
■
Close & lock function
When the power back door is open, this
function closes the power back door and
then locks all of the doors simultaneously.
When the following procedures are per-
formed and there are no electronic keys for
the vehicle within the vehicle, all of the
doors will lock when the power back door is
completely closed.
1
Close all of the doors except the power
back door.
2
While carrying an electronic key, press
the
switch on the lower part of
the power back door (P.115).
A different buzzer than the normal one will
sound and then the power back door will
begin closing automatically. When the
power back door is closed, all of the doors
will lock simultaneously and operation sig-
nals will indicate that all of the doors have
been locked.
Vehicle with Double locking system: The
double locking system will not operate at
this time.
■
Situations in which the close & lock
function may not operate properly
(vehicles with Hands Free Power Back
Door)
In the following situations, the close & lock
function may not operate properly:
●
If the
switch on the lower part of
the power back door is pressed by a hand
which is holding an electronic key
If the
switch on the lower part of
●
the power back door is pressed when the
Advertisement
Table of Contents
