Table of Contents
Advertisement
Rear seat switch
Luggage room switch
2
Check that the plate for the seat
belt is on the front side of the seat.
When using the seat belt for the rear
center seat (P.38)
Operating conditions for folding down
■
the seatback (power seat)
When the following conditions are met,
switch operations are possible.
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
3-3. Adjusting the seats
●
When operating the rear seat switch: The
seatback position is within the
in the following illustration from the most
upright position.
When operating the instrument panel
●
switch or luggage compartment switch:
The seatback position is within the range
of illustration
.
B
●
When operating the rear seat switch:
When the rear door for the seat to be
operated is open.
When operating the luggage compart-
●
ment switch: When the back door is
open.
●
When the other operation switches for
the seat being operated are not pressed.
When the engine switch is in IGNITION
ON mode, in addition to the above, the
power seat operates for any of the following
conditions:
• Parking brake is engaged
• The brake pedal is depressed
• The shift lever is in P
■
Operating conditions for returning the
seatback (power seat)
When the following conditions are met,
switch operations are possible.
●
When operating the rear seat switch: The
seatback position is within the
in the following illustration from the most
upright position.
139
range
A
3
range
A
Advertisement
Table of Contents
