Table of Contents
Advertisement
126
3-2. Opening, closing and locking the doors
Canceling the kick sensor (vehi-
cles with Hands Free Power
Back Door)
ON (enable) and OFF (disable) can be
switched between by the
multi-information display. (P.90)
1
Press
trol switches and select
2
Press
trol switches, select the "Vehicle
Settings" and then press
3
Press
trol switches, select
then press
4
Press
trol switches, and then select "Kick
Sensor".
5
ON and OFF will be switched over
with presses of
control switches.
When OFF is selected and the operations
of the kick sensor is made to stop from the
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
of the
or
of the meter con-
.
or
of the meter con-
.
or
of the meter con-
and
.
or
of the meter con-
on the meter
of multi-information display, unless it is
set to ON, the operation of the kick sensor
will not return. (No return in the engine
switch operation)
Adjusting the open position of
the back door (vehicles with
power back door)
The open position of the power back
door can be adjusted.
1
Stop the back door in the desirable
position. (P.117)
2
Press and hold the power back
door switch on the back door for 2
seconds.
• When the settings are completed,
the buzzer sounds 4 times.
• When opening the back door the
next time, the back door will stop at
that position.
Returning the back door automatic stop
■
position to the initial settings
Press and hold the power back door switch
on the back door for 7 seconds.
After the buzzer sounds 4 times, it sounds
twice more. When the power back door
does the opening operation the next time,
the door will open to the initial settings posi-
tion.
Advertisement
Table of Contents
