Table of Contents
Advertisement
138
3-3. Adjusting the seats
Rear seat switch
When the seatback is collapsed to the rear,
put the seatback in the most upright posi-
tion and press the switch once again.
Luggage room switch
Returning the rear seatbacks
■
(manual seat)
1
Raise the rear seatback until it
locks.
2
Check that the plate for the seat
belt is on the front side of the seat.
When using the seat belt for the rear
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
center seat (P.38)
Returning the rear seatbacks
■
(power seat)
1
Press and hold the switch to return
the seatback.
The buzzer sounds and operations start.
The buzzer sounds again when the opera-
tion is complete.
To stop the operation of a seat partway,
press either seat operation switch for that
seat, once more. Switches for that seat in
other locations can be used to stop the
operations. (buzzer sounds depending on
stopping position of the seatback)
Instrument panel switch
Advertisement
Table of Contents
