Table of Contents
Advertisement
unavoidable, refer to P.54 for front
passenger seat adjustment.
2
Adjust the seatback angle to the
most upright position. When install-
ing a forward-facing child seat, if
there is a gap between the child
seat and the seatback, adjust the
seatback angle until good contact
is achieved.
3
If the head restraint interferes with
your child restraint system, and the
head restraint can be removed,
remove the head restraint. Other-
wise, put the head restraint in the
upper most position. (P.145)
4
Run the seat belt through the child
restraint system and insert the plate
into the buckle. Make sure that the
belt is not twisted.
Securely fix the seat belt to the child
restraint system in accordance to
the directions enclosed with the
child restraint system.
5
If your child restraint system is not
equipped with a lock-off (a seat belt
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
1-2. Child safety
locking feature), secure the child
restraint system using a locking clip.
6
After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
(P.70)
Removing a child restraint system
■
installed with a seat belt
Press the buckle release button and
fully retract the seat belt.
When releasing the buckle, the child
restraint system may spring up due to the
rebound of the seat cushion.
Release the buckle while holding down the
child restraint system.
Since the seat belt automatically reels itself,
slowly return it to the stowing position.
■
When installing a child restraint system
You may need a locking clip to install the
child restraint system. Follow the instruc-
tions provided by the manufacturer of the
system. If your child restraint system does
not provide a locking clip, you can purchase
the following item from your Lexus dealer:
Locking clip for child restraint system
(Part No. 73119-22010)
69
1
Advertisement
Table of Contents
