98
2-1. Instrument cluster
G monitor (if equipped) (P.92)
Boost Meter (if equipped) (P.92)
Brake Override System (P.161)
Drive-Start Control (P.161)
Switching the head-up display
"HUD" button
■
Pressing the button turns the head-up
display on/off.
"DISP" button
■
Pressing the button changes the dis-
play items
A
follows:
• Off
• Eco Driving Indicator
• Tachometer
• Tachometer/Boost Meter (if
equipped)
• G monitor (if equipped)
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
(except vehicle speed) as
Head-up display
■
The head-up display may seem dark and
●
hard to see when viewed through sun-
glasses, especially polarized sunglasses.
Adjust the brightness of the head-up dis-
play or remove your sunglasses.
●
When the head-up display is turned off, it
will not display anything until it is turned
on again.
WARNING
■
Before using the head-up display
Check that the position and brightness of
the head-up display image does not
interfere with safe driving. Incorrect
adjustment of the image's position or
brightness may obstruct the driver's view
and lead to an accident, resulting in
death or serious injury.
■
Caution for changing settings of the
head-up display
As the engine needs to be running while
changing the settings of the head-up dis-
play, ensure that the vehicle is parked in a
place with adequate ventilation. In a
closed area such as a garage, exhaust
gases including harmful carbon monox-
ide (CO) may collect and enter the vehi-
cle. This may lead to death or a serious
health hazard.