Table of Contents
Advertisement
Dynamic radar cruise con-
*
trol
*
: If equipped
In vehicle-to-vehicle distance con-
trol mode, the vehicle automati-
cally accelerates and decelerates
to match the speed changes of the
preceding vehicle even if the accel-
erator pedal is not depressed. In
constant speed control mode, the
vehicle runs at a fixed speed.
Use the dynamic radar cruise con-
trol on freeways and highways.
Vehicle-to-vehicle distance con-
trol mode (P.261)
Constant speed control mode
(P.265)
System Components
LEXUS NX300/NX200 Owners Manual̲General̲M78540̲en
4-5. Using the driving support systems
Multi-information display
A
Set speed
B
Indicators
C
Vehicle-to-vehicle distance switch
D
Cruise control switch
E
WARNING
■
Before using dynamic radar cruise
control
Driving safely is the sole responsibility
●
of the driver. Do not rely solely on the
system, and drive safely by always pay-
ing careful attention to your surround-
ings.
●
The dynamic radar cruise control pro-
vides driving assistance to reduce the
driver's burden. However, there are
limitations to the assistance provided.
Read the following conditions carefully.
Do not overly rely on this system and
always drive carefully.
• When the sensor may not be correctly
detecting the vehicle ahead:P.266
• Conditions under which the vehicle-
to-vehicle distance control mode may
not function correctly: P.266
●
Set the speed appropriately depend-
ing on the speed limit, traffic flow, road
conditions, weather conditions, etc.
The driver is responsible for checking
the set speed.
Even when the system is functioning
●
normally, the condition of the preced-
ing vehicle as detected by the system
may differ from the condition
observed by the driver. Therefore, the
driver must always remain alert, assess
the danger of each situation and drive
safely. Relying solely on this system or
assuming the system ensures safety
while driving can lead to an accident,
resulting in death or serious injury.
259
4
Advertisement
Table of Contents
