Assembling The Stand - Dürkopp Adler 513 Operating Instructions Manual

Setup
Operating Instructions 513/533 - 01.0 - 09/2023
6.3.2

Assembling the stand

Fig. 56: Assembling the stand
①
(1) - Adjusting wheel
(2) - Pedal
To assemble the stand:
1. Turn the adjusting wheel (1) to ensure that the stand is set up
securely. All 4 feet of the stand must be in contact with the floor.
2. Screw the pedal (2) to the stand strut (3).
3. Slide the pedal (2) so that it sits in the middle of the stand
strut (3). The stand strut (3) has elongated holes to allow for
alignment.
②
(3) - Stand strut
③
87