Parameter
Possible values
Additional reflector •
Off
•
On
Additional reflec‐
10 ... 1000 mm
tor - Reflector size
Note
You can find more information about the additional reflector in the chapter Installing an
additional reflector (optional) (Page 47).
8.2.4.2
CenSOR - Image processing parameters
Figure 8-6
SIMOCRANE CenSOR
Operating Instructions, 07/2021
Default
Off
125 mm
Image processing parameters
Description
This parameter activates the calculation of a second
rotation angle (Skew2) based on an additional re‐
flector.
Use this parameter to specify the width of a white
area of the additional reflector.
This parameter is used to search for the additional
reflector.
Parameterization
8.2 Application
79