Table of Contents
Advertisement
Commissioning
7.3 Setting up the camera
Step 4: Select the reflector alignment and size
Open the "Program" menu under "Application" and then the options for "CenSOR". Under
"Reflector parameters", select the alignment of the main reflector and specify its size. If you are
using an additional reflector, you can activate this and also specify its size.
If the parameters have been set correctly, a green frame is displayed around the reflector or
reflectors.
Figure 7-9
58
Reflector parameters
SIMOCRANE CenSOR
Operating Instructions, 07/2021
Advertisement
Table of Contents
