Standards And Certifications; Directives And Declarations - Siemens 6GA7202-2AA10-1BF1 Operating Instructions Manual

Appendix
A.3 Standards and certifications
A.3

Standards and certifications

A.3.1

Directives and declarations

CE mark
The SIMOCRANE CenSOR camera measuring system complies with the requirements and safety
objectives of the following EC directive.
EMC Directive
The devices meet the requirements of the EU directive "89/336/EEC
Electromagnetic Compatibility" (modified by 91/263/EEC, 92/31/EEC and 93/68/EEC) is designed
for use in an industrial environment in accordance with the CE mark.
Area of application
Industry
Declaration of Conformity
The EC Declaration of Conformity and corresponding documentation is available for the
responsible authorities according to the above-mentioned EC Directive at the following address:
Siemens AG
Drive Technologies Division
Motion Control Systems
Frauenauracherstrasse 80
91056 ERLANGEN
GERMANY
Your marketing contact can provide these if requested.
Installation guidelines
The installation guidelines and safety notices specified in the documentation must be adhered
to during commissioning and operation.
DIN ISO 9001 certificate
The SIMOCRANE CenSOR system was developed according to the quality directives of ISO 9001
License agreement for supplied software
The device is supplied with software installed. Please note the corresponding license
agreements.
152
Emission
EN 61000-6-4: 2001
Requirements
Immunity
EN 61000-6-2: 2001
SIMOCRANE CenSOR
Operating Instructions, 07/2021