Risk of falling SIMOCRANE CenSOR components
All screwed joints are equipped with suitable screw locks to safely prevent SIMOCRANE CenSOR
components from falling down after installation.
• Always use these screw locks for installation.
• The screw locks may not be disabled or removed.
Note
Install the camera vertically
Install the SIMATIC MV540 H CRANES camera on the trolley such that the camera is positioned
vertically above the reflector that is mounted on the load suspension device.
The camera lens must face downwards.
Attach the camera unit and the mounting plate to the trolley; see figure below:
①
②
③
④
⑤
⑥
⑦
SIMOCRANE CenSOR
Operating Instructions, 07/2021
WARNING
Ring light holder (external)
Lighting unit MV540 LED ring light metal IR clear
Socket for lighting unit
Protective lens barrel ∅ 65
Camera
Torx screws M4x8
Camera mounting plate
Installation/connection
6.2 SIMOCRANE CenSOR for an indoor crane
37