Table of Contents
Advertisement
Reader status and access status
The camera status indicates the current status of the camera.
Table 8-1
Icon
Start
Stop
Edit
The access status indicates the status of the WBM at the current time.
Table 8-2
Icon
Red padlock
Blue padlock
Red-gray padlock
Green padlock
Login area
If user management is activated ("Settings" → "User management"), you must log in here in
order to make changes in the WBM. Your user name is displayed as soon as you are logged in. You
can also log out in this area.
Help
Click the question mark icon "?" to call up the online help for the WBM. The help is context-
sensitive. The help page for the menu in which you are currently working is automatically
displayed.
SIMOCRANE CenSOR
Operating Instructions, 07/2021
Camera status
Description
The camera has the "Start" status. This means that the device is currently in
processing mode (RUN).
The camera has the "Stop" status. This means that the device is currently
neither in processing mode nor in productive operation. The device is not
operating (STOP).
The camera has the "Edit" status. This means the device is currently in edit
mode and changes can be made to the configuration.
Access status
Description
Operation is not possible in the "Read only" status because the WBM of an‐
other PC has control of the camera.
The logged-in user is not authorized to change settings.
DISA is active. Operation is not possible in this status because an automation
system has control of the camera. Only users with "Take control" rights are
permitted to take over control of the camera from the automation system.
The currently logged-in user has taken over control of the camera. The con‐
nected controller cannot access the camera for this reason.
Parameterization
63
Advertisement
Table of Contents
