Installing An Additional Reflector (Optional) - Siemens 6GA7202-2AA10-1BF1 Operating Instructions Manual

6.4

Installing an additional reflector (optional)

Notes on installation
1. The orientation of the pattern is the opposite to that of the main reflector.
2. The main reflector and the additional reflector should be on the same vertical plane in
relation to the camera if possible.
3. A larger distance (d) improves the accuracy but reduces the range of application, as the
additional reflector can no longer be detected by the camera during hoisting.
4. Avoid the transitional range of ±180 degrees (on the left in the camera image)
Additional reflector
- 90 °
Figure 6-7 Installing an additional reflector
SIMOCRANE CenSOR
Operating Instructions, 07/2021
Y-Deflection (Gantry)
d
- 180 ° / +180°
6.4 Installing an additional reflector (optional)
X-Deflection (Trolley)
0 °
Main reflector
Installation/connection
+90 °
47