Parameterization
Menu tree
The menu tree with the different menu items is located on the left side of the WBM. The currently
selected menu item is highlighted in color. The table below provides an overview of the menu
items and the functions they provide.
Table 8-3
Menu structure of the WBM
Menu items
Start page
Application
Program
Libraries
CenSOR calibration
Settings
Communication
Options
Security
User management
Device
Diagnostics
System
Adapt
Help
Main window
The main window shows the contents of the selected menu items. Here you can configure the
various menu-dependent parameters. The main window is divided into three columns in the
menu items "Application" and "Libraries".
Message area
The message area displays all WBM-related error messages and warnings (e.g. transfer errors).
Active messages or warnings are displayed at the top of the main window. Note that the
message area is only displayed on the homepage of the WBM.
64
Functionalities
•
Call up device and network information
•
Start/stop processing mode of existing programs
•
Define and test image acquisition settings, camera alignment and processing
tasks
•
Monitor/control processing
Calibrate X/Y position of the reflector
Define communication settings
Define general device settings
Assign role-specific rights
•
Activate/deactivate user management
•
Create and delete user profiles
•
Change passwords
•
Display and back up device data
•
Create system image including diagnostics
•
Handling for persistent diagnostics
•
Reset camera to factory settings
•
Save/restore device configuration
•
Update the firmware
Define settings for the WBM display
•
More help on the WBM and the devices
•
Readme
•
"Service & Support" contact information
SIMOCRANE CenSOR
Operating Instructions, 07/2021