Table of Contents
Advertisement
Monitoring
In this group, you specify whether live images are displayed in processing mode.
Table 8-30
Monitoring
Parameter
During processing
Persistence (persistent data storage)
In this group, you specify which diagnostic information you want to store permanently on the
EPROM.
Table 8-31
Persistence
Parameter/
button
Save next error image
Save next data records ☐ / ☑
Number of data re‐
cords
Delete image
Delete entries
Persistent storage of an error image
SIMOCRANE CenSOR
Operating Instructions, 07/2021
Possible values
•
Auto
•
Off
•
On
Possible values
☐ / ☑
10 ... 2000
--
--
Default
Description
Auto
Here you specify whether a live image is to be dis‐
played on the "Run" page in processing mode:
•
Off: No live image
•
On: Live image is displayed
•
Auto: Live image is displayed load-dependent
Default
Description
☐
The image belonging to the next NOK signal is saved in
the EPROM. If an image is already stored there, it is
overwritten when this function is selected.
☐
As soon as the function is activated, the number of
diagnostics entries you specify in the following input
box are saved in the EPROM. Existing entries are de‐
leted when you switch over to On. If the diagnostics
buffer in the EPROM reaches the number of perma‐
nently storable diagnostic data records, no further en‐
tries are made.
Note
Deleting takes several seconds.
2000
See "Save next data records" parameter.
Note
This input box is active only when you have selected
the "Save next data records" check box.
--
When you click this button, you delete an image stored
in the EPROM.
Note:
This button is only active when there is an image in the
EPROM.
--
When you click this button, you delete all diagnostics
entries stored in the EPROM.
Note:
This button is only activated if diagnostic entries are
already stored in the EPROM.
Parameterization
8.4 Settings
103
Advertisement
Table of Contents
