Table of Contents
Advertisement
Commissioning
7.2 Connecting the camera
Result
The SIMATIC MV540 H CRANES camera is now configured.
You can access the camera from your PC using the IP address that was assigned to the camera.
Note
Restart required
It may be necessary to restart the camera depending on the selected operating mode. To do this,
switch off the power supply and switch it back on again.
Step 4: Start Web Based Management (WBM)
Start the user interface as follows:
1. Start your web browser.
2. Enter the IP address of the camera in the address bar of your browser.
52
SIMOCRANE CenSOR
Operating Instructions, 07/2021
Advertisement
Table of Contents
