Copy And Swap; Overview; Executing A Copy/Swap - Sony XVS-G1 User Manual

Copy and Swap

Overview

You can copy the settings of a switcher bank or key to
another switcher bank or key.
You can also swap the settings between switcher banks or
keys.
The following settings can be copied/swapped.
• Switcher banks
Copy/swap settings between switcher banks
• Keys
Copy/swap settings between keys
• Wipes
Copy/swap wipe settings between switcher banks
• DME wipes
Copy/swap DME wipe settings between switcher banks
• Independent key transition wipes
Copy/swap independent key transition wipe settings
between keys
• Independent key transition DME wipes
Copy/swap independent key transition DME wipe
settings between keys
• DMEs
Copy/swap DME settings between DME channels
Copy/swap menus
Switcher banks
Copy/swap switcher bank settings using the Home >
Utility > Copy/Swap > M/E menu (18201.31).
Notes
• The following settings cannot be copied/swapped.
- Setup data
- Wipe snapshots
- DME wipe snapshots
- Snapshots
- Effect timelines
- Key snapshots
- Key memory
• When using DME channels on a switcher bank to be
copied, the DME channel selection status may not be
able to be copied depending on the number of DME
channels that can be used.
Keys
Copy/swap key settings using the Home > Utility > Copy/
Swap > Key menu (18201.32).
Notes
• The following settings cannot be copied/swapped.
- Setup data
- Key snapshots
- Key memory
• When using DME channels on a key to be copied/
swapped, the DME channel selection status may not be
able to be copied/swapped depending on the number of
DME channels that can be used.
• When settings for a normal key are copied to an SL key,
the settings for functions that cannot be used on SL keys
are reset to the default values.
Wipes/DME wipes
Copy/swap wipe and DME wipe settings using the Home
> Utility > Copy/Swap > Wipe/DME Wipe menu
(18201.33).
Select a tab to change the target wipe for operation.
[Wipe] tab: Wipes
[Key Wipe] tab: Independent key transition wipes
[DME Wipe] tab: DME wipes
[Key DME Wipe] tab: Independent key transition DME
wipes
DMEs
Copy/swap DME settings using the Home > Utility >
Copy/Swap > DME menu (18201.34).

Executing a Copy/Swap

This section describes copying a wipe as an example.
1
Open the Home > Utility > Copy/Swap > Wipe/DME
Wipe menu (18201.33).
2
Select the [Wipe] tab.
3
In the list on the left, select a copy source wipe.
4
In the list on the right, select a copy destination wipe.
5
Press the [Copy] button.
To swap
Select the wipes to swap in the lists on the left and right,
and press the [Swap] button.
To undo a copy or swap
To undo a copy or swap immediately after copying/
swapping, press the [Undo] button.
Executing a copy using buttons
You can perform the following copy functions using
button operations on the control panel.
Copy target Using buttons
Switcher banks [SNAPSHOT] button in the Flexi Pad
control block
193