Selecting And Setting List Items - Sony XVS-G1 User Manual

Button Status
display
When an on/off switch is set to the on (enable)
position:
The switch is slid to the right and is displayed in
blue.
When adjusting a parameter:
The button is displayed in light blue.
When a radio button is selected:
The button is displayed in blue.
When a setting is not yet applied:
Depending on the function, the setting must be
applied using the [Apply] button.
When a setting is not yet applied, a yellow
asterisk (*) is displayed on the button.
When selection is disabled:
Buttons and switches that cannot be selected are
grayed out.
Groups
Buttons for related functions are grouped.
A line indicating the group name and range of the group is
displayed above the buttons.
Depending on the group, only one button or multiple
buttons within the group may be selected.
Tabs
When the menu display area or a pop-up window
comprises several pages, each page is displayed on a tab.
Select a tab to change the display.

Selecting and Setting List Items

When the target of an operation is selectable from multiple
items, the items are displayed in a list.
Select All checkbox
Number selection button
List display
You can move the display position in a list using a swipe
operation or using the scrollbar slider in order to select a
target item.
The row for the item that has focus is shown in light blue.
When multiple items in a list can be selected, a checkbox
is displayed on the left side of each item.
Selecting using a checkbox
To select an item, place a check mark in the checkbox.
To select multiple items, place a check mark for the target
items for operation.
Select All checkbox
To select or deselect all items, use the Select All checkbox.
When there are items selected in a list, a blue square is
displayed in the Select All checkbox.
To select all items, place a check mark in the Select All
checkbox.
To deselect all items, clear the check mark from the Select
All checkbox.
Selecting by entering a list number
If a number selection button is displayed below the list,
you can enter a list number to select an item.
Press the number selection button to display the numeric
keypad window.
Enter the number of the target item and press [Enter].
When selecting multiple items, use a hyphen or comma to
specify numbers.
39
Slider
Operation Scrollbar
buttons