Setting The Macro Mode - Sony XVS-G1 User Manual

Setting the operation of the first keyframe
when a register is recalled
1
Open the Home > Setup > Panel > Custom > Effect
TL/Macro Mode menu (19104.63).
2
In the [Recall Mode] group, select an action for the
first keyframe.
Recall: Do not execute the first keyframe when a
register is recalled.
Recall&Rewind: Execute the first keyframe when a
register is recalled.
Setting the operation when the [RUN]
button is pressed during effect timeline
execution
You can set the operation when the [RUN] button in the
utility control block or the [Run] button in the menu is
pressed again while executing an effect timeline.
1
Open the Home > Setup > Panel > Custom > Effect
TL/Macro Mode menu (19104.63).
2
In the [Run 2nd Press Mode] group, select an operation
mode.
Continue: Continue execution of the effect timeline.
Cancel: Cancel the effect timeline and return to the
previous state.
Setting the operation of the first keyframe
when rewind is executed
You can set execution of the first keyframe when rewind is
executed on a GPI, P-Bus, DDR/VTR, and macro effect
timeline.
Note
When enabled, the first keyframe is not executed when an
effect timeline is executed using the [RUN] button in the
utility control block or the [Run] button in the menu.
1
Open the Home > Setup > Panel > Custom > Effect
TL/Macro Mode menu (19104.63).
2
In the [Rewind&1st KF] group, set the button for the
target effect timeline to the on state.
GPI: GPI timeline
P-Bus: P-Bus timeline
DDR/VTR: DDR/VTR timeline
Macro: Macro timeline
To disable the setting
In the [Rewind&1st KF] group, set the button for the target
effect timeline to the off state.

Setting the Macro Mode

Setting the macro execution mode
1
Open the Home > Setup > Panel > Custom > Effect
TL/Macro Mode menu (19104.63).
2
In the [Macro Execution Mode] group, select a macro
execution mode.
Normal: Normal execution mode
Step: Step execution mode
To enable simultaneous execution of
multiple macros
You can enable macro multi mode.
1
Open the Home > Setup > Panel > Custom > Effect
TL/Macro Mode menu (19104.63).
2
Set the [Macro Multi Recall Mode] button to the on
state.
To disable multi mode
Set the [Macro Multi Recall Mode] button to the off state.
Setting the operation when a different
macro is recalled during macro execution/
pause
1
Open the Home > Setup > Panel > Custom > Effect
TL/Macro Mode menu (19104.63).
2
In the [Macro Recall Override] group, select an
operation mode.
Disable: Disable the other macro recall.
Enable: Terminate the executing/paused macro and
execute the other macro.
Setting the operation when the same
macro is recalled during macro execution/
pause
1
Open the Home > Setup > Panel > Custom > Effect
TL/Macro Mode menu (19104.63).
2
In the [Macro 2nd Recall Mode] group, select an
operation mode.
Cancel: Terminate the executing/paused macro.
Continue: Resume execution of a paused macro or
continue execution of an executing macro when a
macro executed in a macro attachment is recalled
using the same button. Start execution from the
328