Sony XVS-G1 User Manual page 141

Button Operation
Pause playback
Playback
Move to video playback stop point
Move to end of video content
Set current position as playback start point
Set current position as playback stop point
g End of video content
To play audio
Set the [Audio On] switch to the on state.
To repeat playback (looping)
1
Press the [Set Loop Playback] button.
The [Set Loop Playback] window appears.
2
In the [Loop Mode] group, set repeat playback.
Off: Turns repeat playback off.
Loop: Loop playback. When the playback stop point
is reached, playback continues from the playback
start point.
When the [Loop] button is selected, set the number of
repetitions in the [Repeat] group.
Set the repetitions radio button to the on state, press the
input field, and enter the number of repetitions in the
numeric keypad window.
To repeat indefinitely, set the [Infinite Loop] radio
button to the on state.
3
Press [OK].
To change the playback speed
Set the [Variable Speed] button to the on state and set the
following parameter.
No. Parameter Adjustment
2 Clip 1 Speed Playback speed (0% to 100%)
Note
When the [Variable Speed] button is set to the on state,
audio is not played.
Playing video (device control block)
The device control block can be switched to device/frame
memory/clip player operation mode for playback control
of video.
Note
The buttons used for selecting a clip player output channel
must be assigned to the operation buttons of the device
control block beforehand.
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 317).
1
Press the [DEV] button.
The [DEV] button is lit amber, and the operation mode
switches to device/frame memory/clip player
operation mode.
2
Press the [CP1] button.
The [CP1] button is lit green, and clip player output
channel 1 becomes the target of operations.
When group mode is enabled, the buttons for the two
combined clip player output channels are lit.
3
Press the [PLAY] button.
The [PLAY] button is lit amber, and playback starts.
To stop playback, press the [STOP], [CUE], [REW],
[FF], or [ALL STOP] button.
Video playback operations
Operate using the following buttons.
Button
FM LOOP
START TC
STOP TC
STOP
CUE
REW
PLAY
FF
ALL STOP
141
Operation
Repeat (loop) playback
Set current position as playback start
point
Set current position as playback stop
point
Pause playback
Move to video playback start point
Move to start of video content
Playback
Move to end of video content
All stopped