Chapter 29 System Configuration And Management; Configuring System Devices - Sony XVS-G1 User Manual

System Configuration
and Management
System Configuration menu
This menu is used to configure network settings and the
components of the switcher system, and to create user
accounts.
Administrator privileges are required for some menu
operations.
For details about system configuration, refer to the
XVS-G1 Installation Manual.
Chapter
Configuring System
Devices
Detecting devices connected to the
network
You can detect control panels connected to the network of
the switcher system.
1
Open the System Configuration > Configuration >
System menu (20101.11).
2
Press the [Detect/Refresh] button.
The information and status of the detected control
panels are displayed.
" " is displayed for connected control panels.
Configuring devices connected to the
network
Select a control panel to use and configure the network
information.
Note
Switcher settings cannot be changed.
The switcher is set to unit ID1 (fixed). The host name of
the switcher is set in the System Configuration > Network
> Network Settings menu (20201.11).
1
Open the System Configuration > Configuration >
System menu (20101.11).
2
Select the target control panel to set.
3
Press the [Unit ID] button and select a unit ID (1 or 2)
from the pull-down list.
You can configure only one control panel for each of
unit ID1 and unit ID2.
4
Press the [Hostname] button and enter a host name (up
to 63 characters) using the keyboard.
353
29