Edge Effects; Setting A Border - Sony XVS-G1 User Manual

Ch ID: Channel ID
Wire Frame: Wire frame
Grid: Grid
To reduce the display size of graphics display
Set the [Scale] button to the on state and set the following
parameter.
No. Parameter Adjustment
1 Scale Degree of scale reduction
To automatically erase the graphics display when
an effect timeline is executed
Set the [Auto Erase] button to the on state and set the
following parameter.
No. Parameter Adjustment
1 Recover Time Time for redisplaying graphics
after an effect timeline has
completed

Edge Effects

This section describes the menu for DME channel 1 as an
example.

Setting a Border

1
Open the Home > DME > Channel1 > Edge > Border/
Crop menu (15101.21).
2
Set the [Border] button to the on state and set the
following parameters.
No. Parameter
1-1 H
1-2 V
1-3 All
1-5 Density
2-1 Top
2-2 Left
2-3 Right
2-4 Bottom
2-5 Density
a) The [Density] parameter in numbers 1-5 and 2-5 are common.
3
In the [Border Fill] group, select a signal to insert in
the border.
Flat Color: Single color
Ext Video: External input (Ext In) signal
When the [Flat Color] button is selected, set the
following parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue
To soften the border
Set the [Border Soft] button to the on state and set the
following parameter.
No. Parameter
1 Soft
152
Adjustment
Simultaneous adjustment of
border width of left and right
edges
Simultaneous adjustment of
border width of top and bottom
edges
Simultaneous adjustment of
border width of top, bottom,
left, and right edges
a)
Density of border
Border width of top edge
Border width of left edge
Border width of right edge
Border width of bottom edge
a)
Density of border
Adjustment
Luminance
Saturation
Hue
Adjustment
Softness of inner edge of border