Chapter 26 Router/Tally Setup; Setting The Ns-Bus Matrix; Assigning Switcher Inputs/Outputs; Setting An External Box - Sony XVS-G1 User Manual

Router/Tally Setup
Copying router/tally settings information
When using two control panels in a switcher system, the
tally is controlled by control panel 1.
Consequently, the router/tally settings information for
control panel 1 must be copied to control panel 2.
Copy the router/tally setup data using the Home > File
menu, for example.
For details about Home > File menu operations, see
"Chapter 19 File Management" (page 255).
Chapter

Setting the NS-Bus Matrix

You can configure the required setting using the routing
function of LSM (Live System Manager). The LSM
interface uses the NS-Bus protocol.

Assigning Switcher Inputs/Outputs

The switcher matrix size is set to 320×348.
1
Open the Home > Setup > Router/Tally > NS-Bus >
Matrix menu (19106.11).
The settings status of the switcher and external boxes
is displayed.
2
Select [Switcher] for [Device].
3
Press the [Source] button and enter an address for the
first source in the numeric keypad window.
4
Press the [Destination] button and enter an address for
the first destination in the numeric keypad window.
5
Press the [Level] button and enter a level (1 to 8) in the
numeric keypad window.

Setting an External Box

You can configure a matrix for external boxes 1 to 5.
1
Open the Home > Setup > Router/Tally > NS-Bus >
Matrix menu (19106.11).
The settings status of the switcher and external boxes
is displayed.
2
Select the target external box to set.
Select [Ext Box 1] to [Ext Box 5] for [Device].
339
26