Sony XVS-G1 User Manual page 19

Function Button name Description
name
NAM NAM
Super Mix SUPER MIX
Preset Color PST COLOR
Mix MIX
Wipe WIPE
DME Wipe DME WIPE
FM1&2 Clip to FM1&2 CLIP
FM15&16 Clip to FM15&16
CLIP
Wipe direction selection buttons
Function Button name Description
name
Normal NORM
Normal/ NORM/REV
Reverse
Reverse REV
Transition preview buttons
Function Button name Description
name
Transition TRANS PVW Switches the transition
Preview
Pattern limit setting buttons
Function Button name Description
name
Limit Set LIMIT SET
Pattern Limit PTN LIMIT
Main/sub switching buttons (multi program 2
mode)
Function Button name Description
name
Main MAIN
Selects NAM (non-additive
mix).
Selects super mix.
Selects preset color mix.
Selects wipe.
Selects DME wipe.
Selects clip transition.
The wipe proceeds in the
direction from black to white
of the pattern images,
shown in "Wipe Pattern
List" (page 366), or in the
direction of the arrows
(normal).
The wipe direction
alternates between normal
and reverse after each
transition.
The wipe proceeds in the
opposite direction of normal
(reverse).
preview mode.
You can check a transition
using preview output.
Sets the pattern limit.
Enables the pattern limit.
Switches operation to the
function on the main side in
multi program 2 mode.
Simultaneously pressing
the [SUB] button activates
both the main and sub
operations.
Function Button name Description
name
Sub SUB
c Display
The display shows the following information.
• Left-side display:
Target switcher bank name (M/E1 to M/E5, P/P)
Main and sub assignment status when in multi program
2 mode (MAIN, SUB, MAIN&SUB)
• Right-side display:
Transition rate
During key priority setting operation, the display shows
the following information.
• Left-side display:
State (displayed inverted when on) and priority of key 1
to key 4
Main and sub assignment status when in multi program
2 mode (M, S)
• Right-side display:
State (displayed inverted when on) and priority of key 5
to key 8
Main and sub assignment status when in multi program
2 mode (M, S)
d Independent key transition execution section
(assignable buttons)
You can assign executions buttons for independent key
transitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 317).
Function Button name Description
name
Key1 KEY1
Transition to TRANS to
Key8 KEY8
Transition TRANS
Key1 On to KEY1 ON to
Key8 On KEY8 ON
19
Switches operation to the
function on the sub side in
multi program 2 mode.
Inserts or removes a key
automatically with the set
transition rate and transition
type.
During the transition, the
button is lit amber.
Inserts or removes a key
instantaneously.
If a key is currently
inserted, the button is lit
amber.