Safe Title - Sony XVS-G1 User Manual

For utility 1 bus
Set the [Video Process] button in the [Utility 1] group
to the on state.
For utility 2 bus
Set the [Video Process] button in the [Utility 2] group
to the on state.
3
Set the following parameters.
No. Parameter
1 Video Gain
2 Y Gain
3 C Gain
4 Hue Delay
5 Black Level
To return the video process function settings to
the defaults
Press the [Unity] button for the target bus to set.
Adjustment
Video signal gain
Luminance signal gain
Chrominance signal gain
Hue delay
Black level

Safe Title

You can enable/disable the safe title function. When
enabled, the safe title area is displayed.
You can set the safe title area display method (Box1, Box2,
Cross, Grid) in the Home > Setup > System > Output >
Safe Title menu (19101.43).
For details about settings, see "Setting the Safe Title
Area" (page 297).
Note
You can enable/disable the safe title function using a
utility command.
For details about utility commands, see "Utility
Functions" (page 177).
1
Open the Home > Utility > Safe Title menu
(18201.11).
2
Select the target output to set.
To select and set multiple outputs, place a check mark
beside the target outputs to set.
To select and set all outputs, place a check mark in the
Select All checkbox.
3
Enable/disable the safe title function using the [Safe
Title] switch.
On: Enable the safe title function.
Off: Disable the safe title function.
192