Editing A Macro Event - Sony XVS-G1 User Manual

2
Press the [Register No.] button and enter a register
number in the numeric keypad window.
When creating, select an empty register. When editing,
select the target register to edit.
Macro edit mode is activated.
When editing a macro in another menu session
Set the [Edit Enable] button to the on state. Check the
message and press [OK] to switch to macro edit mode.
3
If required, set auto insert mode.
To enable auto insert mode, set the [Auto Insert]
button in the [Edit] group to the on state.
To disable auto insert mode, set the [Auto Insert]
button in the [Edit] group to the off state.
For details about auto insert mode, see "Auto insert
mode" (page 237).
Notes
• Auto pause insert mode cannot be set using the
menu.
• Pressing the [All Edit Options] button in the [Edit]
group displays the [Edit Macro Event] window. You
can also set auto insert mode using the [Auto Insert]
button in the [Edit Macro Event] window.
4
Register/edit events.
When creating a macro
Create and register events.
For details about registering events, see "Inserting an
event" (page 241).
You can also register pause events.
For details about registering pause events, see
"Inserting a pause event" (page 245).
Repeat the operation as required to register events.
When editing a macro
Perform event edit operations.
For details, see "Editing a Macro Event" (page 243).
5
Press the [Store] button and enter the target register
number in which to save in the numeric keypad
window.
The currently recalled register number is displayed in
the numeric keypad window. To select another
register, enter a register number.
Press [Enter] to confirm to save the created/edited
macro in the register.
To exit macro edit mode without saving
Press the [Edit Enable] button, check the message,
then press [OK].

Editing a Macro Event

Select the target register to edit in the Home > Register >
Macro > Edit Macro menu (18307.11) to switch to edit
mode and edit an event. When finished editing, save the
register.
For details, see "Creating and Editing a Macro"
(page 242).
You can edit an event using the following menu or the
taskbar.
Home > Register > Macro > Edit Macro menu
(18307.11)
Event list at the top:
Displays the events registered in the selected register.
Select an event insertion position and target event to
edit from the list.
You can check the following information.
• Number and name of register being edited
• Event number
• Event type
Displays "Event" or "Continue."
• Symbol
Displays the symbol name of an event.
• Data
Displays the parameter setting values.
• Parameters
Displays the selected event number and the
configured parameter names below the list.
Operation buttons at the bottom:
Perform edit operations using the [Add New Event]
button, [Edit Event] button, and buttons in the [Edit]
group.
Pressing the [All Edit Options] button in the [Edit]
group displays the [Edit Macro Event] window.
The buttons used for editing are shown on the left and
a numeric keypad area is shown on the right in the
[Edit Macro Event] window.
[Macro Edit] taskbar
You can display the following information and perform the
following operations using the [Macro Edit] taskbar.
• Number and name of register being edited
• Selected event number and total number of events
• Current event symbol and data
A "..." suffix is displayed when the whole data cannot
be displayed.
Press the event data display to display the whole event
data. To return to the previous display, press [OK].
• [Event – Insert After] button
Inserts the current event after the selected event.
• [Edit Macro] button
Recalls the Home > Register > Macro > Edit Macro
menu (18307.11).
243