Data Saved By [Initial Status Define] - Sony XVS-G1 User Manual

Data Saved by [Initial Status Define]

The following initial status data is saved when the
[Switcher/Content] button or [Panel] button in the [Initial
Status Define] group is pressed in the Home > Setup >
System > Start Up menu (19101.11).
Switcher and frame memory/clip player/SL
keys
Data saved using [Initial Status Define] is the same data
saved in a snapshot.
Note
In multi program 2 mode, the operation mode setting is
saved in a snapshot when [Recall M/E Config] is enabled
in the Home > Setup > Switcher > Config > M/E Config
menu (19103.12), but it is not saved by [Initial Status
Define].
Saved data
• The following settings data for each switcher bank
Cross-points, transitions, independent key transitions,
key 1 to key 8, wipes, DME wipes, video process
• Color background 1 and 2
• AUX bus (including AUX mix)
• The following data for frame memory/clip player/SL
keys
Content load status
Frame memory output channel/clip player output
channel status (recalled content, channel combine, audio
enable/disable)
Key fill/key source status for SL keys (recalled content)
Loop, playback start point, and playback stop point
settings
[Variable Speed] button and playback speed settings
• Safe title
• DME override
• Home > DME menu data
Menu numbers: 1510n.01 to 1510n.53 (n = 1 to 4) and
15109.11 to 15109.31.
Control panel
Saved data
• Settings of buttons assigned to the function button
section of the cross-point control block
• Settings of delegation buttons assigned to the 1st row of
the cross-point control block
• Settings of mode selection buttons in the utility control
block
• Settings of banks in the utility control block
• Settings of mode selection buttons in the Flexi Pad
control block
• Settings of key delegation buttons in key operation mode
in the Flexi Pad control block
• Settings of mode selection buttons in the device control
block
387