Signing In / Signing Out - Sony XVS-G1 User Manual

Signing In / Signing Out

When signing in for the first time using an
administrator account
By default, "admin" is the only administrator user account
registered.
When signing in for the first time, the user name is
"admin" and the password is "admin". When you press
[Sign In], a change password message appears. Press [OK]
and change the password.
Note
The password must be 8 to 32 characters, containing at
least one single-byte alphabetic character and at least one
single-byte numeric character.
Signing in to the web menu
1
Access the web menu.
Enter the URL of the web menu in a browser.
"https://IP address of web menu/"
The web menu sign-in screen appears.
Note
The IP address of the web menu is the standard
interface 1 address set in the System Configuration >
Network > Network Settings menu (20201.11).
It is set to "192.168.100.1" by default.
2
Enter your user name and password, and press [Sign
In].
The panel selection screen appears.
To enter your user name automatically when
signing in
Place a check mark in [Remember username].
To change the password
Change the password in the System Configuration >
User Account > Manage Users menu (20601.11).
For details, see "Changing a user account password"
(page 363).
3
Select a control panel to connect and press [OK].
The menu screen appears.
Note
A security warning message may appear when
displaying the menu screen, but continue the
operation.
Signing out from the web menu
Press the overflow button in the header area and select
[Sign Out] from the pull-down list.
Resetting the password of the
administrator user account
You can reset the password of the "admin" administrator
user account to the initial setting ("admin").
The password is reset using the display and buttons on the
front panel of the switcher.
For details about the display and buttons, see "Front
view" (page 27).
1
Press the [SELECT] button until the [Password Reset]
item appears on the display.
The display item changes each time the [SELECT]
button is pressed.
2
Press the [SET] button.
An execution confirmation message appears.
3
Press the [SET] button.
The password is reset.
To cancel execution, press the [SELECT] button.
35