Basic Copy And Swap Operations; Copy And Swap Using Menu Operations - Sony DVS-7250 Operation Software

I/o expansion system

Hide thumbs Also See for DVS-7250:

Table of Contents

Basic Copy and Swap Operations

For copy and swap operations, use the COPY menu. The basic menu

operation is as follows.

Chapter 11 Copy and Swap Operations

In the menu control section, press the MISC button.

Select item 5 (COPY).

The COPY menu appears.

Function key indications in the COPY menu

Press one of function keys F3 (M/E) to F6 (MATTE) to select the type of

data to function keys F3 be copied or swapped.

The function key indications change as follows, except that F5 (XPT

DSBL) appears only if you selected F3 (M/E) or F4 (KEYER).

Press F3 (FROM) or turn control knob 2 to align the cursor on the

"FROM" side with the source of the copy or swap. You can also use the

cursor keys (M m < ,).

Depending on the block you select for the source, a list of the destination

selections appears on the "TO" side.

Press F7 (TO) or turn control knob 3 to align the cursor on the "TO" side

with the destination of the copy or swap. You can also use the cursor

keys (M m < ,).