4. Do either of the following:
a. To configure the LAN interface settings manually, enter values located below the
IPv4 Mask
l
6rd Prefix with Prefix
l
Border Relay IPv4
l
b. To configure these settings automatically, select Automatic. The fields below the buttons are hidden.
5. Click
Apply/Save
to commit your changes.
IPv4inIPv6
On this page, you can configure the IPv4inIP6 settings.
1. In the left navigation bar, click
Note: Currently, only the DS-Lite Mechanism is supported. Consult RFC6333 for further information regarding DS-Lite.
2. Enter a descriptive
Tunnel
3. Select the
LAN
and
WAN
4. Below
Associated LAN
setting automatically, select Automatic. The
5. Click
Apply/Save
to commit your changes.
IPSec
Internet Protocol Security is a protocol for securing communications by packet level encryption and authentication.
On this page, you can enable and remove IPSec connections, or edit existing connections.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Length: Options are 0 - 32.
Length: prefix/length, such as: 2002::/64.
Address: Enter the IP address for the IPv6 relay server.
Advanced Setup
>
IP Tunnel
Name.
interfaces associated with the tunnel you wish to establish.
Interface, enter the appropriate value for
AFTR
>
IPv6inIPv4
and then click Add. The following page appears.
AFTR
(Address Family Transition Router). To configure this
field is hidden.
Manual
button.
97