Table of Contents
Advertisement
Field Name
Description
Precedence
Select the priority value to be associated with the new queue. Options vary by interface
type and include 1(SP - 4(SP), 1(WRR/WFQ) - 7(WRR/WFQ), and 8(WRR).
Note: The lower the value, the higher the priority.
Scheduler Algorithm
(Not applicable for ETH interfaces) Select an algorithm for applying queue data pri-
ority. Options are:
( Not applicable for ETH interfaces ) Enter a weight for prioritizing this queue. Options
Queue Weight
are 1 - 63 .
Minimum Rate
(Applicable for PTM and Dynamic WAN interfaces only) Enter the minimum shaping rate
for packets in QoS queues. Options are 1 - 1255 kbps1 - 100000 Kbps.
To specify no minimum rate, enter -1.
Shaping Rate
(Applicable for PTM and Dynamic WAN interfaces only) Enter the shaping rate for pack-
ets in QoS queues. Options are 1 - 1255 kbps1 - 100000 Kbps.
To specify no shaping, enter -1 .
Shaping Burst Size
(Applicable for PTM and Dynamic WAN interfaces only) Enter the shaping burst size to
be applied to packets in the defined queue. Options are 1600 bytes or greater.
( Applicable for PTM and Dynamic WAN interfaces only ) Select the priority for the PTM
PTM Priority
interface. Options are Low and High .
Wlan Queue
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Strict Priority: Applies weighting based on the
l
Weighted Round Robin: Applies a fair round robin scheme weighting that is
l
effective for networks with fixed packet sizes, e.g., ATM networks.
Weighted Fair Queuing: Applies a fair queue weighting scheme by allowing dif-
l
ferent sessions to have different service shares for improved data packet flow in
networks with variable packet sizes, e.g., PTM/IP networks.
Priority
field value.
74
Advertisement
Table of Contents
