Table of Contents
Advertisement
3. Fill in the fields using the information provided in the table below. All fields are optional.
Field Name
Source Zone
Destination Zone
Source IP
Destination Device
Destination IP
Mode
Fields defined for using a service
Service Type
Service
Fields defined for configuring the rule manually
Public port/
Public port range
Protocol
Local port/
Local port range
Port Type
Enable Hairpin
4. Click ACCEPT. The dialog box closes and the new mapping appears in the
5. To edit a mapping:
a. Click the
Edit
b. Modify the fields as needed, and then click SAVE. The updated values appear on the page.
6. To disable a mapping, clear the
page but is not active.
7. To remove a mapping, click the
8. Click
APPLY
to save your changes.
Downstream QoS
On this page, you can configure how traffic is prioritized over your wireless networks to improve quality of service.
SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019
Description
Select the source zone from the zones defined for your network. The default is WAN.
Select the destination zone. The default is LAN.
Enter the IP address for the source device (such as 192.168.1.44).
Select a connected device from the devices available in the selected zone.
This field is populated when you select a destination device. To modify this address, type a
different address in the field.
Select whether to use the settings defined for a service or to define the port settings manually.
Options are Select Service From List and Configure Manually. The default is Select Service From
List.
Select the type of service. The
Access, Messaging Telephone, VPN, and Audio and Video.
Select the service for the service type that you selected. The options vary by the type of service.
(Appears when Configure Manually is selected in the
or range of numbers. Options are 1 - 65535.
(Appears when Configure Manually is selected in the
are UDP, TCP, and TCP + UDP.
(Appears when Configure Manually is selected in the
range of numbers. Options are 1 - 65535.
(Appears when Configure Manually is selected in the
port or a range of ports. When you click Port range, the
range
field and the
Local port
To enable hairpin protocol, click the
icon (
) to the right of the mapping entry. The Add/Edit Port Forwarding dialog box appears.
checkbox
that appears before the
Trashcan
icon to the right of the mapping. The mapping definition is removed.
Service
field appears. Options are Server, Consoles, Remote
field) Enter the applicable port number
Mode
field) Select the correct protocol. Options
Mode
field) Enter the local port number or
Mode
Mode
Public port
field changes to the
Local port range
white
circle.
Port Forwarding
Name
column. The mapping definition remains on the
field) Select whether to enter a single
field changes to the
field.
list.
Public port
49
Hide quick links:
Advertisement
Table of Contents
