Configure Security For 2.4Ghz Wireless Data Service; Figure 27. Wireless 2.4Ghz Security - ADTRAN 400 Series Basic Configuration Manual

3.11.1.1

Configure Security for 2.4GHz Wireless Data Service

Use the Wireless 2.4GHz - Security screen to establish a password for the SSID.
Device Info
Advanced Setup
Wireless
Diagnostics
Management
Logout

Figure 27. Wireless 2.4GHz Security

1. To set or change the password, choose the appropriate SSID from the
2. In the Network Authentication dropdown window, option select the one designated for
3. If you would like this service protected, enter a password in the
4. Select Apply/Save.
What's Next!
This completes the configuration for wireless 2.4GHz data service. To configure wireless data
service to 5GHz, go to
page 54.
61287RGONT-29C
Revision C
2.4GHz
Basic
WPS
Security
MAC Filter
Wireless Bridge
Advanced
5.0GHz
Wifi Passpoint
dropdown window. For this example, ADTRAN_2GHz_02B4 is used.
2.4 GHz service. In this example, WPA2-PSK is used.
window.
This sets the WiFi Protected Service (WPS).
Section 3.11.2, "Configure for 5.0GHz Wireless Data Service"
Wireless 2.4Ghz -- Security
This page allows you to configure security features of the wireless LAN interface
You may setup configuration manually.
Manual Setup AP
You can setup the network authentication method, selecting data encryption, specify
whether a network a network key is required to authenticate to this wireless network
and specify the encryption strength. Click "Apply/Save" when done.
Select SSID: ADTRAN_2Ghz_02B4
Network Authentication:
WPA2-PSK
............
WPA/WAPI passphrase:
Apply/Save
Basic Configuration
Click here to display
Select SSID
WPA/WAPI passphrase
on
53