Volume Board - HP Elite x2 G8 Maintenance And Service Manual

4. Lift the assembly out of the computer (4).
NOTE: The plastic power button can be removed, once the board is removed.
Reverse this procedure to install the power button board.

Volume board

To remove the volume board, use this procedure and illustration.
Table 6-11 Volume board description and part number
Description
Volume board and cable (includes the power connector cable)
Before removing the volume board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the display panel (see
3. Disconnect the battery cable from the system board (see
4. Remove the speakers (see
Remove the volume board:
1. Disconnect the volume board cable from the system board (1).
2. Disconnect the volume board cable from the volume board (2).
3. Remove the two Phillips M1.4 × 1.9 screws (3) that secure the assembly to the computer.
Preparation for disassembly on page
Display panel on page
Speakers with antennas on page
42).
Battery on page 46).
55).
Spare part number
L67419-001
40).
Volume board 61