Table of Contents
Advertisement
2.
Detach the battery (2) from the display panel assembly. (The battery is attached to the display
panel assembly with double-sided adhesive.)
3.
Remove the battery.
Reverse this procedure to install the battery.
Power/volume button board
Description
Power/volume button board (includes cable)
Before removing the power/volume button board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Disconnect the battery cable from the system board (see
Remove the power/volume button board:
1.
Release the zero insertion force (ZIF) connector (1) to which the power/volume button board
cable is attached, and then disconnect the power/volume button board cable from the
system board.
Back cover on page
12).
Spare part number
785175-001
Battery on page
14).
Power/volume button board
15
Advertisement
Table of Contents
