Usb Board (Usb/Volume/Hard Drive Led/Card Reader) - HP ENVY x360 Convertible Maintenance And Service Manual

USB board (USB/volume/hard drive LED/card reader)

Description
USB board (includes cable)
Before removing the USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the top cover (see
5. Disconnect the battery.
To remove the USB board:
1. Disconnect the cable from the system board (1).
2. Remove the two Phillips PM2.0×3.0 screws (2) that secure the board to the computer.
Top cover on page 27).
Spare part number
807527-001
Component replacement procedures 37