Heat Sink With Fan - HP Elite x2 G8 Maintenance And Service Manual

Heat sink with fan

To remove the heat sink, use these procedures and illustrations.
Table 6-14 Heat sink descriptions and part numbers
Description
Heat sink with fan
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the display panel (see
3. Remove the battery (see
NOTE: The heat sink is spared with the system board. Take care when removing this module as it can be
easily damaged.
Remove the heat sink:
1. Disconnect the fan cable from the system board (1).
2. In the order indicated on the heat sink, remove the four captive Phillips M1.4 × 1.6 screws (2) that secure
the heat sink to the computer.
NOTE:
taken when removing to avoid bending the module.
3. Use a tool to release the heat sink from the system board (3).
66 Chapter 6 Removal and replacement procedures for authorized service provider parts
Display panel on page
Battery on page
Make sure the grounding clips align with the heat sink for proper reinstallation. Care should be
Preparation for disassembly on page
42).
46).
Spare part number
L67416-001
40).