Burnt Smell; Post; No Video (With Power) - HP Elite x2 G8 Maintenance And Service Manual

Burnt smell

Use this information to troubleshoot burnt-odor issues.
Table 7-14 Issues, possible causes, and fixes
Items
Symptoms
Emits smoke, burnt smell
The following steps are for authorized providers or technicians.

POST

Use the following sections to troubleshoot Power-on Self Test issues.

No video (with power)

Use this information to troubleshoot video issues.
Table 7-15 Issues, possible causes, and fixes
Items
Symptoms
No video (black or blank image)
●
but have power
Light activity
●
No error messages
●
Fan noise
●
Hard drive light blinking and hard
●
drive noise
Procedures
Possible causes
Defective on-board components.
Troubleshooting steps
General visual inspection
1. Disconnect the computer from power source (AC adapter and battery).
2. Inspect for visual damage on AC adapter and battery. Test on a known working
computer to isolate issue. If issue follows AC adapter or battery, replace it.
3. Inspect any sign of liquid spill on the computer (back of keyboard).
Further inspection on components
1. Inspect further sources internally after disassembling chassis, such as burnt or
damaged components.
2. If the issue persists, replace boards, AC adapter, and battery for safety concern,
and report issues to HP.
Procedures
Possible causes
Failed display
Failed critical components (memory, hard drive, system board)
Loose connection
Recently added hardware
NOTE: These suggestions assume that the computer has not previously been set up for
multiple displays.
Troubleshooting steps
Quick check
1. Verify that system light activity is OK.
Burnt smell 91