Volume Button Board - HP Elite x2 1011 G1 Maintenance And Service Manual

3. Remove the fan (3).
Reverse this procedure to install the fan.

Volume button board

Description
Volume button board
NOTE: The volume button board spare part kit does not include the volume button board cable. The
volume button board cable is included in the Slate Cable Kit, spare part number 793721-001.
Before removing the volume button board, follow these steps:
1. Shut down the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and
then shut it down through the operating system.
2. Disconnect all external devices connected to the slate.
3. Disconnect the power from the slate by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the slate.
4. Remove the display panel assembly (see
5. Remove the battery (see
Remove the volume button board:
44 Chapter 5 Removal and replacement procedures – slate
Display panel assembly on page
Battery on page 36).
Spare part number
793733-001
32).