Power Button Board - HP Elite x2 G8 Maintenance And Service Manual

Reverse this procedure to reassemble and replace the POGO connector.

Power button board

To remove the power button board, use this procedure and illustration.
Table 6-10 Power button board description and part number
Description
Power button board
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the display panel (see
3. Disconnect the battery cable from the system board (see
Remove the power button board:
1. Disconnect the power button board cable from the system board (1).
2. Remove the Phillips M1.4 × 2.5 screw (2) that secures the power button board to the computer.
3. Remove the Phillips M1.4 × 1.2 screw from the bracket (3).
60 Chapter 6 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Display panel on page 42).
40).
Battery on page 46).
Spare part number
L67420-001