HP Elite x2 G8 Maintenance And Service Manual page 64

Table 6-8 Camera module descriptions and part numbers
Description
IR camera (2 MP)
HD camera (8 MP)
Microphone cable
IR LED cable
IMPORTANT:
Before removing the display panel, follow these steps:
Prepare the computer for disassembly (see
▲
Remove the camera module:
1. Disconnect the four cables from the ZIF connectors on the camera module (1).
2. Using a Phillips #0 screwdriver, remove the two Phillips M1.4 × 2.5 screws (2) that secure the module to
the computer, and then remove the module from the computer (3).
3. If you need to remove the IR LED cable from the camera module, pull the cable straight up and off the
camera module (1).
54 Chapter 6 Removal and replacement procedures for authorized service provider parts
Use care to prevent damaging the zero-insertion force (ZIF) connector and ribbon cable.
Preparation for disassembly on page
Spare part number
L67412-001
M75415-001
L67421-001
M75416-001
40).