Sure Start Unable To Find Valid Bios Boot Block Image; Sure Start Has Identified A Problem (Manual Recovery Policy Set); Post Error Messages And User Actions - HP Elite x2 G8 Maintenance And Service Manual

The BIOS measurement has changed.
●
For more information about Intel TXT, go to
http://www.intel.com/content/dam/www/public/us/en/documents/white-papers/trusted-execution-technology-security-
.
You must use a service event to resolve this issue.
NOTE: The computer attempts to notify you of this problem through a series of blinking lights. When you
attempt to turn on the computer from an Off or Hibernated state, lights associated with the
num lock keys both blink six times, followed by a pause, and then continue in a repeating pattern.

Sure Start unable to find valid BIOS Boot Block image

This computer has experienced a problem in locating a valid BIOS image, resulting in a failed startup. You must
use a service event to identify the source of the error and take appropriate corrective action.
NOTE: The computer attempts to notify you of this problem through a series of blinking lights. When you
attempt to turn on the computer from an Off or Hibernated state, lights associated with the
num lock keys both blink seven times, followed by a pause, and then continue in a repeating pattern.

Sure Start has identified a problem (Manual Recovery Policy Set)

This computer has experienced a problem in locating a valid BIOS image, resulting in a failed startup. HP Sure
Start normally repairs this type of issue; however, on this computer HP Sure Start has been configured to
operate in manual mode key sequence.
To proceed with the repair, press and hold the following keys:
for this manual recovery step, set the HP Sure Start recovery policy to automatic. If this error reoccurs, you
must use a service event to identify the source of the error and take appropriate corrective action.
NOTE: The computer attempts to notify you of this problem through a series of blinking lights. When you
attempt to turn on the computer from an Off or Hibernated state, lights associated with the
num lk keys both blink eight times, followed by a pause, and then continue in a repeating pattern.

POST error messages and user actions

Use this information to determine the meaning of POST error messages.
Table 7-55 POST error messages and user actions to address the error
Test description
Product
information
Startup test
Startup test
Startup test
Startup test
Failure descriptions Error code
Invalid value 00A
Memory module 200
Hard Disk 1 SMART 301
Hard Disk 2 SMART 302
Hard Disk 1 Quick 303
esc + up arrow + down
Possible user actions
Contact support for assistance.
Attempt to reseat the memory module and then repeat the test.
Search http://www.hp.com/support
issues related to the memory module.
If the memory module still fails, contact support.
Attempt to reseat the hard drive and repeat the test.
The hard disk drive might have failed. Contact support for assistance.
The hard drive might have failed. Contact support for assistance.
The hard drive might have failed. Contact support for assistance.
Sure Start unable to find valid BIOS Boot Block image
caps lock and
caps lock and
arrow. To avoid the need
caps lock and
for details about troubleshooting
127